Matelec FSA 60000
IMPORTANT INFORMATION:
IF YOUR SMOKE ALARMS ARE SOUNDING AND THERE IS AN IMMINANT FIRE THREAT YOU SHOULD EVACUATE AND CALL 000.
YOU SHOULD NOT NEED TO MANUALLY TURN OFF OR DEACTIVATE A SMOKE ALARM. IF YOUR ALARMS HAVE BEEN DEACTIVATED USING THE FOLLOWING METHOD PLEASE ADVISE YOUR SMOKE ALARM SERVICE PROVIDER OR PROPERTY MANAGER BY EMAIL SO A TECHNCIAN CAN BE SENT TO YOUR PROPERTY TO URGENTLY RESOLVE THE ISSUE.
Important Information Before deactivating your sounding alarms.
- Check for a fire (If there is a fire get to a safe location and call 000)
- If there is no fire you need to find the triggering alarm by looking at every alarm while they're there and find the alarm flashing RED FAST.
- To silence the triggering alarm press the hush button on the smoke alarm flashing red fast. (This will silence your alarms for 10minitus)
- Now clean/dust your alarms bye Vacuuming and light dusting (This will generally fix the fault as dust and insects can get in the alarms)
- After 10 to 15 minutes when the alarms turn back on if they alarm again follow the deactivation guide below on the triggering alarm
- Contact your property manager or smoke alarm service team for a quick repair/service.
Turning off or deactivating Matelec FSA 60000
- Locate the button on the side of the alarm lables PUSH.
- Press the button to release the alarm.
- As you press it, the alarm will swing open from its mounted position on the ceiling or wall.
- open the door on the left hand back side of the alarm to find the batter, you can now remove the battery.
- Your alarm is now deactivated.
Video can’t be displayed
This video is not available.
Matelec FSA 60000 Info:
Power Type: 240V/Backup Battery
Interconnection Type: Wired / Optional WifiManufacturer: MatelecUsers Manaual: Click Here